How To Make RC Car At Home With Arduino | Bluetooth RC Car

 


Introduction:

Remote Controlled Cars, commonly known as RC Cars, have been a source of enjoyment and amusement for people of all ages. Racing with friends or mastering your driving skills, RC cars are packed with action.

In Today's Article of the Car Series, we bring you the making of an RC car. Powered by Arduino and connected via Bluetooth to your cellular device, this car offers you more than just driving. It gives you a sense of satisfaction and control. So, read the article till the end and learn something cool today!

Required Components:

To make this the project you need the following components:

1.      Arduino Circuit Board

2.      Motor Driver L298N

3.      2W Car Chassis

4.      Bluetooth Module HC-05

5.      Battery (~15V)

6.      Jumper Wires (generic)

Circuit Diagram:

Follow this circuit diagram to patch the circuit.

Project Code:

Hardware Setup:

Watch this complete video to get a better understanding of circuit patching and code.

EndNote:

We hope you enjoyed this article. Share it with your friends, and peers. Subscribe to our newsletter to get an email notification every time we upload an article.

We value your constructive feedback, in case you have any queries or suggestions, email us at suport@deeplift.tech or join us on Social Media. Happy Learning!


Comments

  1. james john25 October 2021 at 14:30

    The article was up to the point and described the information about education and learning. Thanks to blog author for wonderful and informative post. AA Meeting Directory

    ReplyDelete
  2. james john25 October 2021 at 14:32

    The article was up to the point and described the information about education and learning. Thanks to blog author for wonderful and informative post. Local AA Meetings

    ReplyDelete

Post a Comment

Popular Posts

How To Make Line Follower Using Three IR Sensor | Arduino Line Following Car

Image
Line Follower Cars are autonomous cars that follow a given route. We have already learned to make a Line Following Car using 2 IR sensors to follow easy tracks . Today we'll make a Line following car using Arduino and 3 IR sensors , that will precisely follow a black line over a white surface , take sharp 90 degree turns and easily follow high curvature curves . Before moving ahead, make sure you understand the Working Mechanism of IR Sensor and learn how to make 2 IR Sensor Line Follower Robot . This project is an upgrade of 2 IR Sensor Line Follower Robot.  Hardware Setup Components Required: Arduino UNO Motor Driver L298N Car Chassis (Car Frame | 2 x DC gear Motor | 2 x Tires) Jumper Cables 3 x IR Sensor  Car Assembly: The first step is to assemble the car chassis. To learn more about assembly, refer to this article:  Assemble Car Chassis . For visual demonstration refer to this video:  Assemble Car Chassis . Circuit Diagram: Software Setup Arduino needs to be programmed suc
Read more

How To Make Line Follower Car with Speed Control | 6 IR Sensor Arduino Line Following Car

Image
It's easy to make a robot that follows a line or smooth curves, but it becomes challenging to design the line follower robot when its track is complex. But we got you covered. Using 6 sensors and speed control of our car, we'll design our fast and advanced line following robot.  Before starting on this advanced project make sure you understand How Does An IR Sensor Works  and have tried making 2 Sensor Line Follower or 3 Sensor Line Follower . Hardware Setup Components Required Arduino UNO Motor Driver L298N 6 x IR Sensors (1 x TCRT5000 & 1 x HX-01) Car Chassis (Base & Motors & Wheel & Caster Wheel) 12V Battery Pack Jumper Cables Car Chassis Assembly Circuit Diagram Note: For speed control remove the tiny black jumper covering ENA and ENB pins on L298N. Make sure they are covered when not using the speed control, else project may not work. Software Setup Reading Analog Values of IR Sensor In our previous projects, we read digital values from IR Sensor - 0 for
Read more