Operating Bluetooth Module HC-05 With Arduino

Introduction:

Have you only used Bluetooth to transfer files between devices? Then change the way, and learn something new today. In this article, we bring you the Bluetooth Module HC-05-with which you will be able to control devices with help of Arduino and a Bluetooth App installed on your phone. Give voice commands or press buttons, interact the way you like and control your devices over Bluetooth.

This article includes Code, and a video tutorial for a hands-on learning experience.

Required Components:

1.      Arduino Board(Arduino UNO in our case)

2.      LED

3.      Bluetooth Module HC-05

4.      Jumper Wires

5.      Breadboard(optional)

Code Setup:

BlueControl App Setup:

The app we are using for this project is Arduino Bluetooth Control on Android.

If you are an IOS user then we have an alternative solution for you, ArduinoBlue on AppStore. The IOS app does not support Vocal commands. In the future, if we come across a better alternative for IOS users we will update the article.

EndNote:

To understand and configure this project better, watch the video till the end. If you liked our effort, subscribe to our Newsletter, and YouTube channel and stay tuned with new project articles, and videos.

Comments

Post a Comment

Popular Posts

How To Make Line Follower Using Three IR Sensor | Arduino Line Following Car

Image
Line Follower Cars are autonomous cars that follow a given route. We have already learned to make a Line Following Car using 2 IR sensors to follow easy tracks . Today we'll make a Line following car using Arduino and 3 IR sensors , that will precisely follow a black line over a white surface , take sharp 90 degree turns and easily follow high curvature curves . Before moving ahead, make sure you understand the Working Mechanism of IR Sensor and learn how to make 2 IR Sensor Line Follower Robot . This project is an upgrade of 2 IR Sensor Line Follower Robot.  Hardware Setup Components Required: Arduino UNO Motor Driver L298N Car Chassis (Car Frame | 2 x DC gear Motor | 2 x Tires) Jumper Cables 3 x IR Sensor  Car Assembly: The first step is to assemble the car chassis. To learn more about assembly, refer to this article:  Assemble Car Chassis . For visual demonstration refer to this video:  Assemble Car Chassis . Circuit Diagram: Software Setup Arduino needs to be...
Read more

How To Make Line Follower Car with Speed Control | 6 IR Sensor Arduino Line Following Car

Image
It's easy to make a robot that follows a line or smooth curves, but it becomes challenging to design the line follower robot when its track is complex. But we got you covered. Using 6 sensors and speed control of our car, we'll design our fast and advanced line following robot.  Before starting on this advanced project make sure you understand How Does An IR Sensor Works  and have tried making 2 Sensor Line Follower or 3 Sensor Line Follower . Hardware Setup Components Required Arduino UNO Motor Driver L298N 6 x IR Sensors (1 x TCRT5000 & 1 x HX-01) Car Chassis (Base & Motors & Wheel & Caster Wheel) 12V Battery Pack Jumper Cables Car Chassis Assembly Circuit Diagram Note: For speed control remove the tiny black jumper covering ENA and ENB pins on L298N. Make sure they are covered when not using the speed control, else project may not work. Software Setup Reading Analog Values of IR Sensor In our previous projects, we read digital values from IR Sensor - 0 for...
Read more